Antifreeze Mix Ratio Calculator

Enter the temperature and system volume to see how much concentrate and water to use.

Pure concentrate is close to 100%. If you already have a ready mix, enter its glycol share.

Concentrate0.9 gal
Distilled water1.1 gal
Glycol in the mix44.9 %
Concentrate : water1 : 1.23

The label on your bottle takes priority: concentrates differ in glycol content and additives.

How it is calculated

Glycol share = interpolation in the freeze-point table

Concentrate = system volume × glycol share ÷ glycol in concentrate

Water = system volume − concentrate

Notation

table (ethylene glycol, % by volume)
30% → −13.7 °C, 40% → −23.5 °C, 50% → −36.8 °C, 60% → −52.8 °C

Worked example

  1. Target −30 °C, ethylene glycol, system 6 L, pure concentrate.
  2. −30 °C lies between 40% (−23.5 °C) and 50% (−36.8 °C): 40 + 10 × 6.5 ÷ 13.3 = 44.9%.
  3. Concentrate: 6 × 0.449 = 2.69 L.
  4. Water: 6 − 2.69 = 3.31 L, a ratio of about 1 : 1.23.

The freeze point depends on the share of glycol in the mix, not on the brand. The calculator uses freeze-point tables for ethylene glycol, the base of most car coolants, and propylene glycol, used in heating systems and where leaks must not be toxic.

Mix with distilled water: tap water leaves scale. Check the label first: some concentrates already contain water or have their own chart.

AdDiscover your destiny!Tarot MagicTarot card readingsStart Reading ✦

Frequently Asked Questions

What is the right antifreeze to water ratio?

The common choice is 50/50: with ethylene glycol it protects to about −37 °C (−34 °F). For milder winters 40% glycol gives about −23 °C; for very cold climates up to 60% gives about −53 °C.

Can I use more than 60% antifreeze?

There is no benefit. Above about 60% the freeze point rises again and the mix carries heat worse, so the engine runs hotter. Pure ethylene glycol freezes at about −13 °C.

Why not use less than 30%?

Corrosion inhibitors in the concentrate are designed for a minimum share. Glycol manufacturers advise at least 30–33% even where frost is not a concern.

Is propylene glycol weaker than ethylene glycol?

Slightly. At 50% by volume propylene glycol freezes at about −34 °C, ethylene glycol at about −37 °C. Do not mix the two types in one system.